UEE20111 Certificate II in Split Air-conditioning and Heat Pump Systems

UEE20111 Certificate II in Split Air-conditioning and Heat Pump Systems

Course overview

UEE20111 Certificate II in Split Air-conditioning and Heat Pump Systems is in the Engineering and Related Technologies Field of Education.

Develop your electrical skills and enhance your practical skills and knowledge with this course and become part of a growing industry.

In this course you will learn how to install, decommission, and commission single head, split air- conditioning and heat pump systems up to 18kWr. The training you will receive can be applied to wall hung, floor and ceiling-suspended, cassette and ducted fan coil systems.

You will also learn to

  • Flare copper and install pipework
  • Solder join copper pipework
  • Pressurise pipework with dry nitrogen and test for leaks
  • Vacuum pipework to remove air and moisture
  • Add additional gas for longer pipe runs
  • Reclaim gas
  • Position, assemble and start up single-head split air-conditioning units and systems to a prescribed routine.

Our industry experienced trainers will give you all the support you will need, and with specifically designed smaller face to face classes it allows our trainers to have proper one-on-one time with all of our students. This course does not include competencies required for service, repair, maintenance, diagnostic/fault finding or the safe and proper installation of commercial refrigeration, air-conditioning equipment.

Further studies can be undertaken to gain these additional qualifications – to find out more go to the top of the home page to “Training Courses” under “Accredited Courses”.  See UEE32211 Certificate III in Air-conditioning and Refrigeration.

Requirements for completion of this qualification

The successful achievement of this qualification requires you to complete 10 core units and 1 elective unit, which is achieved by a combination of face to face workshops, practical training and assessment in a simulated environment and online learning. You are also required to complete additional tasks in your own time, generally 10 hours per week of self-study throughout the course. You will be provided with a workbook for each unit of competency and a workplace logbook.

Who should do this course?

This practical course has been designed for people who meet one of the following criteria:

  • Fully qualified electrician
  • Second year electrical apprentice who has successfully completed first year.
  • Trades background with at least five-year’s experience in the construction industry.

Entry requirements:

This qualification has no formal entry requirements; however, we require that applicants provide evidence of:

  • Electrical qualification and licence or
  • Successfully completing year 1 of electrical apprenticeship (statement of results)
  • Trades background with at least five-year’s experience in the construction industry.
  • a Statement of Attainment for CPCCOHS1001A Work safely in the construction industry or CPCCWHS1001 Prepare to Work safely in the construction industry
  • All students are required to complete a Language, Literacy and Numeracy (LLN) assessment.
  • All students are required to read the student handbook and enrolment form propr to enrolling into this course.

How to enrol:

You will be enrolled with Construction Industry Training Australia. To enrol into a course applicants must complete a Student Enrolment Form available from the website. We will contact you and get you to complete a self-assessment. Once we receive that we will conduct a course suitability interview with you and discuss your experience and goals for the program. This helps make sure that this is the right course for you, and we can discuss any questions you have about your goals, current experience and qualifications and work out a training plan with you.

 

About the qualification:

Unit Code Unit Title Core/ Elective
UEENEEE038B Participate in development and follow a personal competency development plan Core
UEENEEE101A Apply Occupational Health and Safety regulations, codes and practices in the workplace Core
UEENEEE102A Fabricate, assemble and dismantle utilities industry components Core
UEENEEE105A Fix and secure electro-technology equipment Core
UEENEEE107A Use drawings, diagrams, schedules, standards, codes and specifications Core
UEENEEE137A Document and apply measures to control OHS risks associated with electrotechnology work Core
UEENEEJ102A Prepare and connect refrigerant tubing and fittings Core
UEENEEJ105A Position, assemble and start up single head split airconditioning and water heating heat pump systems Core
UEENEEJ172A Recover, pressure test, evacuate, charge and leak test refrigerants split systems Core
UEENEEK142A Apply environmentally and sustainable procedures in the energy sector Core
UEENEEC002B Source and purchase material/parts for installation or service jobs Elective (group A)

Award:

Students achieving a competent result for all units will receive the UEE20111 Certificate II in Split Air-conditioning and Heat Pump Systems. Otherwise students will receive a Statement of Attainment for units successfully completed.

Certificates are issued by Construction Industry Training Australia Pty Ltd RTO provider number 45031. For more information go to www.citatraining.edu.au

Students should also visit the website www.citatraining.edu.au, which gives more information about course fees and refund policy, support services, and other important information about your course. See the Student Handbook for further details.

The website covers the remaining general information that is relevant to all students.

 

For further information, please contact:

Admissions on:

E-mail: info@citatraining.com.au

Phone: 1300558625

Head Office: Unit 2, 83 Kent Way, Malaga WA 6090, Australia

 

 

Brochure & Handbook

UEE20111 Course Brochure (Click Here)
Student Handbook (Click Here)
Share this